AC 100 kW Load Bank
Niawell 3PH-100KW 100 kW three-phase AC load bank for generator and UPS testing, with 240/400 VAC input, forced-air cooling and industrial protection.
The 3PH-100KW is a three-phase resistive AC load bank rated at 100 kW. Before a generator or UPS test, verify voltage, frequency, power factor, connection capacity and hot-air discharge against the equipment documentation and site conditions.
It can be evaluated for resistive testing of a suitable AC generator. Confirm power, voltage, frequency and the approved test profile first.
The available model specification describes resistive loading. A separate appropriate setup is needed when reactive loading or a specified power factor is required.
Share the generator nameplate, kW/kVA, voltage, frequency, site location and intended loading profile.
The data below comes directly from this exact model record and is never substituted with another power rating.
Select a model. Scroll the desktop comparison table horizontally to see all models.
| Specification | 3PH-100KW 100 kW · Portable |
|---|---|
| Electrical Ratings | |
| Model | 3PH-100KW |
| Main Input Voltage | 240/400 VAC, 3-phase, 50 Hz |
| Rated Power | 100 kW |
| Auxiliary Power Supply | 220 V, 1-phase, 50 Hz |
| Cooling System | |
| Cooling | Forced-air cooling |
| Load Steps | |
| Steps | 2, 3, 5, 10, 20, 20, 40 kW |
| Mechanical Specifications | |
| Dimensions (W × D × H) | 46 × 100 × 93 cm |
| Weight | 80 kg |
| Monitoring Features | |
| Electrical Parameters | Total Power, Voltage, Current, Frequency |
| Safety and Protection | |
| Input Protection | Main circuit breaker (250 A, 3-phase) |
| Branch Protection | Fuse protection for each load branch |
| Fan Protection | Fault detection via airflow detector |
100 kW · Portable
Only verified original documents matching this model or technical series are shown here.
